mill-max-mfg.corp., p.o. box 300, 190 pine hollow road, oyster bay, ny 11771-0300.tel: 516-922-6000 fax: 516-922-9253 102 specify plating code xx= 91 93 sleeve (pin) contact (clip) 200 ? sn/pb 200 ? sn/pb 10 ? au 30 ?au surface mount pin grid arrays for standard .100? spacing male pin header & female socket series 599, 514 ? series 599 smt pga headers and series 514 smt pga sockets are assembled with mm pin# 9976, and receptacle# 1434 respectively. each floats vertically within the insulator to compensate for uneven solder paste on the pcb. typical example illustrated. 1) ?floating? pin smt headers using machined epoxy insulator. 2) detail of ?floating? pins which compensate for unevenly screened solder paste. 3) pqfp device 4) translator board 5) existing motherboard header type 9976 ordering information smt receptacle type 1434 for pga male pin header 1. locate footprint pattern from pages 107 to 111, the middle 8 digits of the part number will be located under the pattern. determined from footprint pattern pages 107 to 111 no. of pins grid size pattern # window 5 9 9 1 0 4 7 6 - --- series plating code specify plating code xx= 10 pin plating 10 ?au for pga female socket 1. specify 2-digit plating code from chart at bottom of page. 2. locate footprint pattern from pages 107 to 111, the middle 8 digits of the part number will be located under the pattern. determined from footprint pattern pages 107 to 111 no. of pins grid size pattern # window 5 1 4 0 3 4 - --- series plating code
|
